disposable NON WOVEN cap machinel used in hospital, factory etc
A Process Description :
Elastic, non-woven fabric feeding——Edge Folding——shaping——Welding
Material: non-woven farbic(10g-15g) ,material roll width: 48cm
elastic: double elastic or single elastic
B Technical Parameter :
Supply Power: AC380V or 220V 50HZ
Power : 6.5kw
Optimum Speed : 60-100pcs/minute
Dimensions : 3330*900*1350mm(L*W*H)
C Operating Program
1. Adjust the non-woven fabric plate and tension equipment.
2. Pull the non-woven fabrics into folding and welding manually.
3. Elastic feeding and pull into the Ultrasonic welding.
4. Open the main machine slowly, then start to welding and cutting.
1. Ultrasonic : 3sets (Shangrong)
2. Motor: TaiWan “YongKun”
3. Touch screen: TaiWan “Wei- Lun”
4. Inverter: TaiWan “Sunfar”
5. PLC: Japan “Mitsubishi”
6. Sensor: Japan“OMRON”
1. Please start the ultrasonic welding equipment before open the
main machine to avoid the superimposed load damage the ultrasonic
2. Adjust the ultrasonic mould pressure, too big may burnout it,too
small may press unwell.
3. The pulling should be in balance when elastic feeding, or it may
1. This machine has aluminum alloy rack and will not get rusted
2. It’s touch-operated.
3. With imported brake and motor,it has low noise.
4. With ultrasonic welding,automatically controls tension.
5. With no manual operation from feeding materials.